- #Eutron parallel dongle how to#
- #Eutron parallel dongle install#
- #Eutron parallel dongle drivers#
- #Eutron parallel dongle driver#
Check that the parallel port itself is working by, for example, connecting a printer and try printing. Action D: Check the physical parallel port If Windows does not detect the dongle, continue with next action. Turn off energy saving features in Windows and BIOS. Connect to main power, but do not connect to the docking station. #Eutron parallel dongle driver#
Set the parallel port mode to lowest possible, that is, uni-directional, standard, AT-Compatible or similar, and use the same settings for the driver configuration. This change usually solves many problems. If the parallel port is set to, change to. If this does not help, try changing the settings in the BIOS. Change the driver configuration in the setup program to the same parallel port mode as in the BIOS settings. Examples of locations are: C:\Program Files (x86)\Common Files\SafeNet Sentinel\Sentinel System Driver\SetupSysDriver.exeĬ:\Program Files\Common Files\SafeNet Sentinel\Sentinel System Driver\SetupSysDriver.exeĬ:\Program Files\Rainbow Technologies\Sentinel System Driver\SetupSysDriver.exeĬ:\Program Files\Common Files\IAR Systems\License\SDongle\WIN_NT\Setupx86.exeĬ:\Program Files\Common Files\IAR Systems\License\SDongle\WIN_9X\Sentw9x.exe The location and name of the application depend on which operating system and driver version you use. Now try to change the parallel port settings in the driver configuration application. Medic Says: This button will display Medic's recommendations (if any) for fixing the problem. Medic will display a brief description of the error/status. Error/Status and Description: This area displays the error/status of the search for the key. Note: If you cannot see a version number in the window, this is a strong indication that there is something wrong with the installed drivers. System Driver Information: Displays the system driver that is installed on your system, or the error that occurred trying to communicate with the system driver. The information gained from running Medic is summarized below: #Eutron parallel dongle drivers#
For dongle drivers older than version 5.41, download and use SentinelMedic.For dongle drivers version 5.41.1 and later, download and use SuperProMedic.These actions will test the parallel port dongle with a SafeNet tool. Action C: Check the parallel port dongle with the Medic tool and change the port settings Select Sentinel Protection installer 7.5.2.Choose Start > Settings > Control Panel > Add/Remove Programs.LMS1 should now detect the parallel port dongle.
#Eutron parallel dongle install#
Install dongle driver 7.5.2 as described in Technical Note 200922.Install IAR License Manager 1.29.1 as described in Technical Note 14255.Important - disconnect the parallel port dongle from the PC.Make sure to use the latest software for LMS1: Action A: Install IAR License Manager 1.29.1 and dongle driver 7.5.2 The following actions can be tried individually, but often it is best to perform them top down. When a parallel port dongle isn’t detected by the computer, a typical message is: ‘No valid license found for this product’. Important - a parallel port dongle requires:
#Eutron parallel dongle how to#
This technical note gives suggestions on how to troubleshoot a parallel port dongle, when using an IAR Embedded Workbench version that uses LMS1. Note: - This applies to legacy versions of IAR Embedded Workbench (2013 and older) which used License Management System version 1 (LMS1).
0 kommentar(er)
